For Riders
For Wrenchers
No Bullshit
Product information Willy
Product number: WILL-0

Don't forget the Willy!

Maybe you've seen this before.
Some riders protect their seat tube from dirt and mud by cutting off a piece of old inner tube, wrapping it around the seat post and seat tube and securing it with cable ties. This precaution makes sense, as mud and dirt gets collected on the seat clamp and seat tube in bad weather and subsequently penetrate the inside of the seat tube, causing annoying creaking and scratches on the seat post.

Our Willy does no more nor less, only it solves this problem much more simply and aesthetically. It is made of highly elastic silicone and is available in two different sizes.

Suitable seat post diameter:

  • Willy: 30.9/31.6
  • Willy Max: 34.9

Important note:
The appearance of the Willy depends on the saddle clamp used! Our Willy, can be stretched very well however, within certain limits. There are quite large saddle clamps with long or protruding bolt heads and sharp shapes, which can damage the Willy in the long term because it is stretched too much in certain areas. We may therefore point out that we cannot guarantee that our Willy will work well with all saddle clamps in the long term.
We recommend applying a little grease to the inside of the Willy to make it easier to put on and to reduce the strain in certain areas.

Mehr Tuning für dein Bike

Shifty
color: black
Our Shifty is an extremely effective tuning part for your SRAM rear derailleur.The original idler pulley of the SRAM 1x11 and 1x12 rear derailleurs is made of plastic and rotates on a steel axle without additional bearings.Particularly under poor weather conditions such as water, dirt and mud, the derailleurs can noticeably lose shifting precision. Instead of turning the pulley, the shift cable slides over the pulley with increased friction, causing imprecise shifting or so-called "ghost shifting".The Shifty is made of anodized 6061-T6 aluminium, rotates on a double-sealed stainless steel ball bearing and is simply installed in place of the original plastic pulley.Shifty fits the following rear derailleurs:XX1XX1 Eagle X01 X01 Eagle X01 DH X1 GX1 GX Eagle* EX1 NX* NX Eagle*Weight: 6.3gScope of delivery: 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings1x axle for mounting1x bolt for mounting*On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty.

€31.90*
Squeezy
clamp diameter (inside): 34.9/35mm
In line with our commitment to constant improvement and distinctiveness, the Squeezy is more than just another seat clamp.The uniform wall thickness of the Squeezy ensures a more even and gentle clamping on the seat tube. As a result, higher clamping forces can be achieved at the same tightening torque.To prevent the clamp from slipping during assembly, the Squeezy only features three small slip-stops.The extremely elaborate CNC finish and the neat titanium Torx bolt complete the beautiful look and make the Squeezy an absolute lightweight at 7.9g (34.9/35mm).Especially when using dropper seatposts, an evenly distributed clamping force on the seat tube can have a positive effect on the function of the seatpost.The Squeezy is available for the following seat tube outer diameters.34mm34.9/35mm35.6mm36.4mm37mm38mm38.9/39mmFeaturesWeights: 7g (31.8mm) to 9g (39mm version)Material: AL-7075-T6, precision CNC finishTi-6Al-4V titanium clamping screw with T-25 Torx driveFlangeless design for even distribution of clamping forceSlip-stops as an assembly aid

€28.90*
Grippy
color: black
It would be overstating to say that we have developed the ultimate bike grip, as there are too many individual preferences that need to be taken into account in order to develop THE perfect grip. Nevertheless, we have thought intensively about improvements and possibly innovative approaches that have not yet been realized in a similar way.Eccentric designThe grip's rubber is eccentrically connected to the inner sleeve, which allows us to increase the cushioning on the palm side without increasing the diameter of the grip.Honeycomb structureOur Grippy grips are characterized by a honeycomb-like surface structure which, in combination with the selected material, is not only particularly robust, but also reduces wear without losing the outstanding damping qualities.Cut-out for additional paddingTo increase the damping on the outside of the grip, we have cut out the inner sleeve. As a result, the rubber extends to the diameter of the handlebar, which creates additional comfort where you need it.Integrated end capGrips often have to withstand contact with the ground or trees, so reliable side protection is crucial. That is why we have firmly integrated the end cap of the Grippy into the inner sleeve structure. The slightly widening diameter of the end cap also provides feedback about the end of the grip.Product information:Weight: 113g/pairLength: 140mmOuter diameter : 31mmCompatible handlebar diameter: 22.2mmClamp color: titanium grey anodizedMaterial grip rubber: TPRMaterial inner sleeve: NylonMaterial clamp: Aluminum, forged

€25.00*