1. Make sure your seat tube has the correct diameter
- 34.9mm ~ 35.0mm for Squeezy 35
- 38.0mm ~ 38.5mm for Squeezy 38
2. Make sure that Squeezy can fully slide onto the seattube
The Squeezy must slide the full 12mm height onto the seattube.
3. Maximum torque is 4.5Nm (not greased)
It is recommended to keep the torque just as high as required, yet as low as possible.
The post should not slowly creep into the seattube during riding, but at the same time the post should be able to rotate during a crash or side impacts to avoid overload.
If you torque too high, you may affect the function of your dropper post.
4. Check the seat clamp for proper installation before every ride.