Multi-purpose grease for vario-seatposts, suspension forks and shocks.The special additives help to prevent corrosion when used regularly and keeps seals and wipers supple.We use this grease in our production, and it is suitable for all BikeYoke seat posts.Quantity:30ml (sufficient for about 5 services)Scope of delivery:1x BikeYoke Dropper Goo
BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts.The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C.Special additives help keep your post's o-rings and seals smooth and reduce wear.Suitable for all BikeYoke droppers.Quantity:250ml (sufficient for several complete services of your BikeYoke support)Scope of delivery:1x BikeYoke Sanguine
Service kit for readjusting the lateral play of our dropper seatposts and renewing the wiper as part of the 100-hour service.ATTENTION!!!There are three different kits for the REVIVE and DIVINE, depending on the model year/revision. The kits are not compatible with each other!Be sure to select the correct service kit for your post!Note:Our Service Kit Guide will help you to identify the correct kit for your seatpost. You will find the serial number on the lower tube of the seat post.Scope of delivery:1x wiper6x glide pin1x lower bushing1x foam ring1x circlip R12
Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post.compatible with:REVIVE / REVIVE 2.0Note:Please pay attention to the video description. You can find it under the installation tab.
This set includes a complete lower tube unit with installed bushing and wiper.30.9/31.6 are compatible with each other and allows the change of diameter of your post.Includes:1x Wiper1x Upper bushing1x Lower seatpost tubeFits:REVIVE (30.9/31.6)DIVINE (30.9/31.6)
Seatpost cable set for Bikeyoke seatposts with foot unit.Scope of delivery:1x inner cable, stainless steel, polished, 1700mm (1.1mm diameter)1x outer cable 1500mm (4.2mm diameter)2x housing endcap1x inner cable cable crimpFits: REVIVE / REVIVE 2.0REVIVE MAXDIVINETipp:For our posts, we use standard shift cables and housings, which allow easy supply and exchange.Mind, that there are 1.1mm cables (e.g. SRAM) and 1.2mm cables (e.g. Shimano), which will both work with our posts, but require matching housings.Attenton:Does not fit DIVINE SL, DIVINE SL Rascal und REVIVE 272
Replacement foam rings and bottom out bumper for your BikeYoke dropper post.The foam ring in the lower tube of your BikeYoke dropper post is a crucial component, that prevents water and dirt from entering your post too easily.Keep it dry and clean at all times, so your post can breathe and replace if needed.Includes:2x foam ring1x bottom out bumperFits:REVIVEDIVINEDIVINE SLDIVINE SL RascalAttention:does not fit REVIVE MAX
Attaches to your Reset-Hex-Slot instead of the 4mm Allen-Key, secured by an o-ring (included).No more need to grab your 4mm Allen-Key.Insert the Quick-Reset-Lever carefully and completely into the 4mm Allen key slot to not damage the o-ring and to make sure it is secured properly.You can easily engage it with a pull of your finger.Scope of delivery:1x Quick-Reset-LeverFits:REVIVE/REVIVE 2.0REVIVE MAXREVIVE 272
Cable clamp to actuate our REVIVE and DIVINE posts.Includes:1x Cable clamp body1x Set screw DIN 913 M4x5Fits:REVIVE / REVIVE 2.0REVIVE MAXDIVINETipp:This item is identical to cable clamps that are used on other posts, e.g. KS (Kindshock) LEV Integra.
Scope of delivery: 4x spacers for travel adjustmentFits with:REVIVEREVIVE MAXDIVINENote:The video under the Installation tab shows the installation process on a DIVINE. The REVIVE has a slightly different internal structure, but the installation is performed in the same way: Spacers must be clipped onto the shaft between the piston and seal head.
Saddle clamp bolt version 2.0 with integrated spherical washer.Our posts use two different lengths*:37mm for the front bolt40mm for the rear boltScope of delivery1x saddle clamp boltCompatible with:REVIVE / REVIVE 2.0REVIVE MAXDIVINEDIVINE SLDIVINE SL RASCAL*measures include head
Titanium bolt set for the saddle clamp.The bolts and barrel nuts are compatible with all BikeYoke models.This set is not composed of standard parts but is custom-made according to our drawings and specifications.Both the bolts and the barrel nuts are CNC-machined from the high-strength titanium alloy Ti-6Al-4V and save almost half the weight of the original stainless-steel set.Fits: REVIVEREVIVE 2.0REVIVE MAXREVIVE 272DIVINEDIVINE SLDIVINE SL RascalOne set includes:2x Ti-6Al-4V bolt2x Ti-6Al-4V barrel nut
The upper seat clamp is compatible with all BikeYoke seat posts.Version 2.0 is the latest version.Scope of delivery:1x upper seat clampFits with:REVIVE / REVIVE 2.0REVIVE MAXREVIVE 272DIVINE SLDIVINE SL RASCAL
Allows easier access to your dropper valve for shock-pumps with short valve heads. Also works with any other schrader-valved fork/shock/post.Scope of delivery:1x valve adapter
