Particularly beautiful, an extraordinary strength to weigth ratio are the key features of our Barkeeper stem.
The cost extensive and highly precise production of this masterpiece includes many steps, including:
- precise forging process
- Multi-tempering
- CNC machining of cristical contact interfaces
- Shot peening for surface hardening
- Laser engraving
- black or transparent (RFF - Raw Forged Finish) anodized coating
The incredible attention to detail in manufacturing and finish quality can als be seen in areas, which are not even visible, when installed. Call it nuts, but this is our striving for perfection:
.jpg)
Important note:
The obvious one-piece design allows for an incredible high strenght-to-weigth ration, but it does cost some compatibility. Not every handlebar will be compatible to our Barkeeper stem. Although we have successfuly tested handlebars with 35mm rise, there is no guarantee for compatibility. We assume most handlebar with a rise of up to 30mm will work, but it greatly depends on the slope and shape.
You can find a list of compatible handlebars next to this description under "compatible handlebars". We will try to update this list, so feel free to let us know, once you have successfuly installed a handlebar, which we can add. This list makes no claim to completeness or correctness and is only to be understood as a reference.
Please always follow the installation instructions that come with your stem and which you can also donwload from here.
Specs:
Rise: 0°
Stack height: 40mm
Clamping width: 50mm
Compatible steerer tubes: 1 1/8"
Compatible handlebar diameter: 35mm clamping
Usage Cassification: Category 5 after ASTM F2043-13 or DIN EN 17406:2021 for handlebars up to 800mm width
Material: Aluminum Al-7075, multi-tepered
Weights (titanium / steel bolts):
35mm length: 80g / 86g
45mm length: 90g / 96g
55mm length: 106g / 112g
1 set Barkeeper stem includes:
1x stem
1x set bolts + washers (steell)
1x installation aid (wedge)
2x installation screw
optional:
1x pair of 31.8 reducer sleeves
1x set Ti-bolts T25 (black coated)
1x Aimy (steerer clamp)
1x Topper (headset topcap)
* tested by BikeYoke
** customer feedback, not verified
Please note: handlebars, even if longer ones are mount-able, are only allowed up to a width of 800mm
77Designz Carbon 35, 800mm x 20mm Rise, 5° Up, 9° Back**
DEITY Speedway Carbon, 800 mm x 15 mm Rise*
DEITY Speedway Carbon, 800 mm x 25 mm Rise*
DEITY Skywire Carbon, 800 mm x 15 mm Rise*
DEITY Skywire Carbon, 800 mm x 25 mm Rise*
DEITY Racepoint, 810 mm x 25 mm Rise*
DEITY Racepoint, 810 mm x 38 mm Rise*
DEITY Ridgeline, 800 mm x 15 mm Rise*
DEITY Ridgeline, 800 mm x 25 mm Rise*
DEITY Highside, 800 mm x 50 mm Rise*
DEITY Highside, 800 mm x 80 mm Rise*
e*thirteen Plus 35, 800mm, 35mm Rise**
Hope Carbon Handlebar, 800mm x 20mm Rise*
OneUp Components Carbon Riser, 800mm x 20mm Rise*
OneUp Components Carbon Riser, 800mm x 35mm Rise*
Race Face SixC 35 handlebar 820mm x 20mm Rise*
Race Face SixC 35 handlebar 820mm x 35mm Rise*
Race Face Turbine R Carbon 35, 780mm x 20mm Rise, 5° Up, 8° Back**
Reverse Seismic Carbon 35, 820 x 25 mm Rise, 5° Up, 7° Back**
Santa Cruz 35 Carbon Bar 800 x 35mm Rise, 5° Up, 8.5° Back*
Spank Spike Vibrocore 35, 820mm x 25mm Rise, 5° Up, 8° Back**
TAG Metals MTB T1 CARBON HANDLEBAR 35, 800mm x 40mm, Rise, 5° Up, 7° Back**
Yeti Cycles TURQ Carbon 35, 780mm x 20mm Rise**
.jpg "Preview: BikeYoke Socks 2.0")
.jpg "Preview: Aimy - steerer clamp")
go to post